Filter
Top Products
Configuring the LAN Emulation Clients (LECs)
3-19
■ LES option: Uses the 20-byte address in the ATM
Address box to contact the LAN emulation server
directly.
f Enter the ATM Address.
You must enter the appropriate ATM network
address for the LECS or the LES, whichever is
selected. Unless the user enters a different
address, the ATM Forum’s “well-known” address is
used as the default address when contacting the
LECS. To contact the LES directly, the user must
enter the 20-byte address of the LAN emulation
server.
g Go to substep a to select another client or go to
the next step to exit the client configuration
procedure.
8 When all clients are configured, select the
OK
button.
The LEC Configuration dialog box shown in
Figure 3-10 reappears.
All entries and edits to the LEC Configuration dialog
box and to the LEC ATM Adapter dialog box are not
saved to disk until you select the
OK
button in the
LEC Configuration dialog box. Selecting the
Cancel
button in the LEC Configuration dialog box erases
all the edits in both dialog boxes.
9 Select the
OK
button to exit the LEC
Configuration dialog box.
As noted above, you must select the
OK
button to
save the settings in both dialog boxes.
Alternatively, you can select the
Configure
button
again and return to the LEC ATM Adapter
Configuration dialog box for additional changes and
edits.