Filter
Top Products
Removing a Windows NT Driver
3-21
Removing a Windows NT Driver
To remove an adapter and the associated software
drivers from Windows NT, follow these steps:
1 Select the
Control Panel
icon from the Main
group.
2 Select the
Network
icon to access the Network
Settings screen, shown in Figure 3-13.
Figure 3-13 Removing 3C971-F Adapter and Drivers
3 Select
3C971-F ATMLink PCI Adapter Client 0
from the Installed Adapter Cards list.
The NT operating system does not allow the user to
remove the virtual clients (Client 1 through Client 3)
or software drivers individually. You must select
Client 0.
4 Select the
Remove
button.
You are prompted to confirm the removal of the
adapter, as shown in the dialog box in Figure 3-14.