Filter
Top Products
4-16 CHAPTER 4: NETWARE 4.1 SERVER DRIVER INSTALLATION
Figure 4-18 Selecting the NCF Files Editor
2 Select
NCF files options.
This opens the AUTOEXEC.NCF file for editing.
3 Remove the LOAD and BIND commands for each
channel of the 3C971-F adapter by deleting all
lines similar to the following:
load 3C971FSI.lan FRAME=Ethernet_802.2 Name=3C971FSI_1
bind ipx 3C971FSI_1 net=random_8_digits
load asig
4 Save and exit the AUTOEXEC.NCF file.
5 Exit the NetWare INSTALL utility.
CAUTION:
Do not attempt to reinstall the 3C971-F
adapter drivers before rebooting the server.
6 Reboot the server.