Filter
Top Products
4-12 CHAPTER 4: NETWARE 4.1 SERVER DRIVER INSTALLATION
d Go to step 7.
■ If you want the client to bypass the LECS at bootup
and contact the LES directly, do the following:
a Select
LES Network Prefix
and enter the first
thirteen bytes (26 characters) of the LES’s ATM
network address.
b Select
LES ESI/SEL
and enter the remaining
seven bytes (14 characters) of the ATM network
address.
c Set the LECS Network Prefix and the LECS
ESI/SEL parameters to zero, if they are not set to
zero already.
7 When configuration of the Parameters box is
complete, press [Esc] to move the highlight bar
to the bottom box.
8 Select
Save parameters and load driver.
A random network number, similar to the one shown
in Figure 4-14, is assigned to the new channel.
Figure 4-14 Setting the Network Number
9 Press [Enter] to accept the assigned number.
The dialog box shown in Figure 4-15 appears, asking
whether you want to load the driver again and
configure another channel for the 3C971-F adapter.