Filter
Top Products
5 Installing NetWare Drivers
44
3 NetWare lists the valid slot number(s) for the NIC, depending on how many NICs are
installed. The values appearing in the list are the slot values you should use.
Example:
After you issue the command, a message appears. At the end of the message,
additional text similar to the following appears:
Total of 2 3C99x PCI adapter card(s) found. Supported slot
values are 2,3.
Slot:2
Verifying the Installation and Configuration
To verify that the driver has been properly loaded on NetWare, perform the following
procedure:
1 At the system prompt, enter:
load monitor
The NetWare Monitor screen appears.
2 From the Available Options menu, select LAN/WAN Drivers.
The Available LAN Driver menu appears. If the driver has been properly loaded, the
driver and frame types associated with the driver appear on this menu.
3 Select a driver to view its associated statistics.
A functioning driver displays packets being sent and received.
To verify that the server is communicating over the network, complete the following
procedure:
1 Set up a NetWare client on a LAN supported by the server to be tested.
2 Log in or map to the server.
If you cannot log in or map to the server, the link is not functional.