Filter
Top Products
230 CHAPTER 6: CONFIGURING WX SYSTEM PARAMETERS
b In the Direction list, select In to filter incoming packets or Out to filter
outgoing packets.
9 Click Finish.
The mapping appears in the ACL Mappings table.
Deleting an ACL To delete an ACL:
1 Access the ACL table:
a Select the Configuration tool bar option.
b In the Organizer panel, click the plus sign next to the WX switch.
c Click the plus sign next to System.
d Select ACLs.
2 Select any ACE in the ACL you want to delete.
3 In the Task List panel, select Delete ACL.
Deleting an
Individual ACE from
an ACL
To delete an individual ACE from an ACL:
1 Access the ACL table:
a Select the Configuration tool bar option.
b In the Organizer panel, click the plus sign next to the WX switch.
c Click the plus sign next to System.
d Select ACLs.
2 Select any ACE in the ACL.
3 In the Task List panel, select ACL Rules.
4 Select the ACE and click Delete.
5 Click OK.
You cannot delete the ACE at the bottom of the list. This ACE is added to
the ACL automatically and cannot be deleted. The ACE at the bottom
denies all traffic that does not match other ACEs in the ACL.