Filter
Top Products
DUA1640-5AAA02
7-2
C
HAPTER
7: M
ANAGEMENT
U
SING
THE
W
EB
I
NTERFACE
3
In the browser’s open location window or area, enter the web address
URL
(Uniform Resource Locator) for the stack.
The web address URL for a stack is in the format:
http://
nnn.nnn.nnn.nnn
/
Where
nnn.nnn.nnn.nnn
is:
■
The SLIP address for the stack, which is ‘192.168.101.1’ by default,
if managing through the console port
■
The IP address for the stack, if managing over the network
For example, to access a stack with an IP address of ‘191.1.1.8’ you
would enter:
http://191.1.1.8/
4
When the browser has located the stack, a password panel is displayed,
as shown in Figure 7-1
. Enter your user name and password as
requested.
Figure 7-1
Password Panel
If no passwords have been configured for the stack, the default
password for the security level of user is ‘security’. The user names and
passwords are the same as those that you use to access the CLI. For a
list of the user names and the default passwords, refer to “Default User
Names and Passwords” on page 6-3
.
We recommend that when you have accessed the stack, you change
the default passwords for the user levels (if you have not already done
so) by logging in as the different user levels.
If you forget your password while logged out of the stack, refer to
“Solving Problems With the Web Interface” on
page 8-4
.