Filter
Top Products
186 CHAPTER 6: CONFIGURING WX SYSTEM PARAMETERS
Viewing and
Changing
Management
Settings
By default, HTTPS is enabled on the WX, allowing you to use Web
Management on port 443 for a secure session. If you disable HTTPS, you
cannot use Web Management. 3WXM communications also use HTTPS,
but 3WXM is not affected by the HTTPS configuration on the WX. For
3WXM, HTTPS is always enabled and listens on port 8889.
Viewing
Management Service
Settings
To view management service settings:
1 Select the Configuration tool bar option.
2 In the Organizer panel, click the plus sign next to the WX switch.
3 Click the plus sign next to System.
4 Select Management Services.
The management services and their settings appear in the Content panel.
Changing
Management Service
Settings
To change management service settings:
1 To enable or disable a management service, select or deselect it by
clicking the checkbox next to the service name.
For example, to enable Telnet, click the checkbox to place a checkmark in
the box.
You can individually enable or disable the following management
services:
HTTPS
Telnet
SSH
Web Portal
SNMP
2 To change the Telnet service port, select or type the new port number in
the Port box next to Telnet. The default TCP port is 23.
3 To change the idle timeout for CLI management sessions, edit the value
in the Idle Timeout checkbox.