Filter
Top Products
320 CHAPTER 8: CONFIGURING AUTHENTICATION, AUTHORIZATION, AND ACCOUNTING PARAMETERS
7 To enable this accounting rule for the SSID, select Enabled.
By default, accounting rules you configure in 3WXM are disabled, which
means 3WXM does not add the rules to the switch’s configuration.
8 Select one of the following record options:
Select Start-Stop to specify that records are sent at the start of a
session and the end of a session.
Select Stop-Only to specify that records are sent only at the end of a
session.
9 Select the accounting method(s) in the Available RADIUS Server Groups
list and click Add.
The options and processing are the same as those for authentication
methods. (See step 5.)
10 Click Finish.
Creating an Access
Rule for Telnet or SSH
Access
To create an access rule for Telnet or SSH access:
1 Access the Create Admin User wizard:
a Select the Configuration tool bar option.
b In the Organizer panel, click the plus sign next to the WX switch.
c Click the plus sign next to AAA.
d Select Admin Access Rules.
e In the Task List panel, select Admin Access.
2 Type the userglob that is allowed to access the switch through Telnet or
SSH.
3 Click Next.
4 If the authentication rule is disabled, select Enabled.
When a rule is disabled, 3WXM does not add it to the switch’s
configuration.
5 Select the authentication method(s) in the Available RADIUS Server
Groups list and click Add.
An authentication method specifies where the switch will look for user
information to authenticate users. You can select a RADIUS server group,
LOCAL (the switch’s local user database), or both.