Filter
Top Products
Viewing and Changing Radio Settings 281
Viewing and
Changing Radio
Settings
You can configure MAP radio settings when you configure the MAPs.
You also can view or change radio settings after the MAPs are
configured.
Viewing Radio
Settings
To view radio settings:
1 Select the Configuration tool bar option.
2 In the Organizer panel, click the plus sign next to the WX switch.
3 Click the plus sign next to Wireless.
4 Select Radios.
The radio settings appear in the Content panel. Each row in the table
shows settings for an individual radio.
To display all settings for a radio, select the radio and click Properties.
Changing Radio
Settings
To change radio settings:
1 Access the radio table:
a Select the Configuration tool bar option.
b In the Organizer panel, click the plus sign next to the WX switch.
c Click the plus sign next to Wireless.
d Select Radios.
2 To change basic radio settings, select the new values in the table. To
change more advanced features, select the radio and click Properties.
(For information about the radio parameters in the table, see step 10 on
page 276. For information about the radio parameters in the Radio
Properties wizard, see step 8 on page 279.)
3 If you edit settings in the table, click Save. If you configure settings in the
Radio Properties wizard, clicking OK to close the wizard also saves the
changes.