Filter
Top Products
Filtering Event Messages 381
Filtering Events by
Severity
You can limit the events you see in Event tab based on event severity.
1 Click on the Severity tab.
2 Select or clear the severity levels to display (the following descriptions are
WX-based):
Emergency—The WX is unusable.
Alert—Action must be taken immediately.
Critical—You must resolve the critical condition. If you do not resolve
the condition, the WX might reboot or shut down.
Error—The WX is missing data or unable to form a connection.
Warning—A possible problem exists.
Notice—Events that potentially can cause system problems have
occurred. These are logged for diagnostic purposes.
Info—Informational messages only. No problems exist.
Debug—Output from debugging.
By default, all severity levels are selected. Toggle the All checkbox to
select or clear all severity levels.
3 After selecting the severity levels to log, click Apply to filter out the
unwanted severity levels from the list.
Filtering Events by
Facility
You can limit the events you see in Event Viewer by network facility or
3WXM facility.
1 Click on the Facility tab.
2 Select or deselect individual facilities.
3 After selecting the facilities to log, click Apply to filter out the unwanted
facilities from the list.