Filter
Top Products
Ethernet+Modem/Fax PC Card User’s Guide
2-4 Installation
Software Installation Advisory
1. For those who intend to install Card and Socket Service Support drivers,
reserve at least 64 KB of memory to provide enough resources for other PC
Cards.
Example: DEVICE=EMM386.EXE NOEMS X=D000-DFFF
2. For those who installed Card and Socket Services Support device drivers in
your config.sys, use Super Client drivers to enable the PC Card’s Fax/Modem
function. When the PC Card is inserted into the slot, the Super Client will
detect its presence and activate the PC Card’s functions. Note that some Super
Clients can be used to activate both the PC Card’s modem and LAN functions,
while others only activate the modem function. Accton’s Client driver can
activate both functions for this PC Card.
Example 1: (DataBook CardTalk)
DEVICE=SS_2.SYS (Socket Services driver)
DEVICE=CARDTALK.SYS (Card Service driver)
Example 2: (SystemSoft CardSoft)
DEVICE=SSCIRRUS.EXE (Socket Services driver)
DEVICE=CS.EXE (Card Services driver)
DEVICE=CSALLOC.EXE
Example 3: (Phoenix PCMPlus)
DEVICE=PCMSSDB.EXE (Socket Service driver)
DEVICE=PCMCS.EXE (Card Service driver)
DEVICE=PCMCD.EXE (Super Client driver)
Activating the PC Card
The PC Card can be activated after installing and loading the Client driver, or by
using the Card and Socket Services Support software normally referred to as a
Super Client Driver.