Filter
Top Products
Quick Installation Guide iii
Quick Installation Guide
1Step is designed to simplify the process of configuring the PC Card to run with
NetWare or other network operating systems. To quickly install and configure
your card, do the following:
1. Install the PC Card into a Type II PCMCIA slot.
2. Insert the driver diskette that comes with your package into the floppy drive.
3. Run Install to set up network drivers and configure your card.
4. Use the 1Step program to run diagnostics on the adapter card if required.
5. Refer to the
Software Installation Advisory section in Chapter 2 if you encountered
any problem during installation.
Tip
: When the PC Card is inserted into the PCMCIA slot, it is automatically
detected by the Card Services Super Client driver. The Super Client sets up
the PC Card to enable Fax/Modem functions only. You still need Accton’s
Network Client drivers to activate the LAN function and provide simultaneous
operations for LAN and Fax/Modem functions. If the Card and Socket
Services Program is unavailable, Accton’s Network Client drivers can be used
to provide similar services.
Note
:Simultaneous operations for LAN and Fax/Modem functions are not
supported for Windows NT. (Refer to Chapter 2 for more details.)