Filter
Top Products
Ethernet+Modem/Fax PC Card User’s Guide
Using 1Step 3-7
Selecting Memory Management Options
The host PC may be using Memory Management software. There are four
selections available, namely, Normal, Use XMSNETx, Use EMSNETx, and
DOS5+LOADHIGH. The default setting is Normal. Move your cursor to the
field named Options to change the settings, if necessary.
Identifying the Driver’s Directory Location
Type the directory path in the box labeled Directory to indicate where the
NetWare drivers are located. When you select Install Software from the
Action Menu, 1Step searches this path to find the files it needs.
Installing the Software Driver
Select the Install Software command from the Action Menu to change
the adapter’s software configuration. This command installs the software driver
files in your computer. A dialog box indicating the progress of the operation
automatically appears on the screen. Click <OK> or press <Enter> to proceed and
return to the 1Step main screen.
Menu Bar Commands
The menu bar, located right below the title bar, contains the File, Action and
Help menus. Each of these menus is described below. Selecting any of these
three menus opens a pull-down menu containing a list of commands. Use the
mouse or keyboard to make a selection. Then follow screen instructions to
complete the operation.
The File Menu
Opening the File Menu displays a list of commands for opening an existing
configuration file (*.1st), saving/printing the file, and exiting the File Menu.