Filter
Top Products
Ethernet+Modem/Fax PC Card User’s Guide
Using 1Step 3-5
Available Diagnostic Tests
You need not start any network operating system to run the following tests:
• Configuration Test - Identifies the host PC type
• I/O Test - Checks I/O accessibility
• ID Test - Verifies if the Card’s ID is correct
• RAM Test (or Memory Test) - Checks the condition of on-board RAM
• Internal Loopback Test - Checks the adapter’s controller
• External Loopback Test - Checks the adapter’s network link
• Interrupt Test - Checks interrupt generation
• Network Function Test - Checks the adapter’s ability to receive and transmit
network packets
Setting the Software Configuration
Select the appropriate Network Operating System, Driver, Frame Type, and
Memory Management Options as described below; and then name the directory in
which the drivers are stored. You can point and click with the mouse or use the
keyboard to make selections.
Then run the Install Software command from the Action Menu to install the
network environment that you’ve selected. For NetWare users, a batch file (i.e.,
STARTNET.BAT) for loading of the NetWare driver from DOS during start-up
operations is automatically created. Simply execute this batch file to
automatically load and run the NetWare driver.
Selecting the Network OS
The version of 1Step that comes with this package supports installation for various
NetWare and NDIS drivers. Instructions for installing other drivers, including
packet drivers and UNIX drivers are in README.TXT files.