Filter
Top Products
Ethernet+Modem/Fax PC Card User’s Guide
2-10 Installation
6. Verify the LAN function by using Network Neighborhood to browse the
network for any existing server.
Note: NetWare Network support is loaded by default when the PC Card is
installed.
7. Verify the Modem function by opening up the Dial-Up Networking
folder and connecting to a modem site.
8. Use the Windows 95 Fax utility to verify the Fax function:
• Go to Fax from the Accessories group under the Programs folder
• Click on the Compose New Fax icon
• Click on the Dialing Properties command button
• Type the appropriate information into the text boxes where applicable.
• Follow screen instructions to complete the Fax operation
Installing under Windows NT 3.5x
The current version of Client drivers only support the LAN function for Windows
NT 3.50 and earlier. The LAN and Modem functions are both supported for
Windows NT 3.51 and later. However, because the Windows NT 3.51 network
interface is based on the miniport NDIS3 driver which can’t be shared by different
program tasks, only one function can be loaded at a time.
To install the LAN function of the PC Card:
1. Plug the PC Card in your card slot.
2. Go to the Control Panel and double-click on the Network icon.
3. Click on the Add Adapter command button.
4. Enter the directory path in the driver diskette where Client Drivers for the
platform you are installing are located, e.g.,
A:\NT351
5. Test the LAN function of the PC Card by logging on to a network.