Filter
Top Products
Class of Service Configuration
3-159
3
Web – Click Priority, Default Port Priority or Default Trunk Priority. Modify the default
priority for any interface, then click Apply.
Figure 3-88 Port Priority Configuration
CLI – This example assigns a default priority of 5 to port 3.
Console(config)#interface ethernet 1/3
4-131
Console(config-if)#switchport priority default 5
4-199
Console(config-if)#end
Console#show interfaces switchport ethernet 1/3
4-140
Information of Eth 1/3
Broadcast threshold: Disabled
LACP status: Disabled
Ingress rate limit: disable, Level: 30
Egress rate limit: disable, Level: 30
VLAN membership mode: Hybrid
Ingress rule: Enabled
Acceptable frame type: Tagged frames only
Native VLAN: 1
Priority for untagged traffic: 5
GVRP status: Disabled
Allowed VLAN: 1(u),
Forbidden VLAN:
Private-VLAN mode: NONE
Private-VLAN host-association: NONE
Private-VLAN mapping: NONE
Console#