Filter
Top Products
Configuring the Switch
3-6
3
Trunk Broadcast Control Sets the broadcast storm threshold for each trunk 3-105
Mirror Port Configuration Sets the source and target ports for mirroring 3-106
Rate Limit 3-107
Granularity Enables or disables the rate limit feature 3-107
Input Port Configuration Sets the input rate limit for each port 3-108
Input Trunk Configuration Sets the input rate limit for each trunk 3-108
Output Port Configuration Sets the output rate limit for each port 3-108
Output Trunk Configuration Sets the output rate limit for each trunk 3-108
Port Statistics Lists Ethernet and RMON port statistics 3-109
Address Table 3-114
Static Addresses Displays entries for interface, address or VLAN 3-114
Dynamic Addresses Displays or edits static entries in the Address Table 3-115
Address Aging Sets timeout for dynamically learned entries 3-117
Spanning Tree 3-117
STA
Information Displays STA values used for the bridge 3-119
Configuration Configures global bridge settings for STA and RSTP 3-123
Port Information Displays individual port settings for STA 3-127
Trunk Information Displays individual trunk settings for STA 3-127
Port Configuration Configures individual port settings for STA 3-130
Trunk Configuration Configures individual trunk settings for STA 3-130
VLAN 3-139
802.1Q VLAN
GVRP Status Enables GVRP VLAN registration protocol 3-142
Basic Information Displays information on the VLAN type supported by this switch 3-142
Current Table Shows the current port members of each VLAN and whether or
not the port is tagged or untagged
3-143
Static List Used to create or remove VLAN groups 3-145
Static Table Modifies the settings for an existing VLAN 3-147
Static Membership by Port Configures membership type for interfaces, including tagged,
untagged or forbidden
3-148
Port Configuration Specifies default PVID and VLAN attributes 3-150
Trunk Configuration Specifies default trunk VID and VLAN attributes 3-150
Table 3-2 Main Menu
(Continued)
Menu Description Page