Filter
Top Products
Command Line Interface
4-60
4
• key - An MD5 authentication key string. The key string can be up to 32
case-sensitive printable ASCII characters (no spaces).
Default Setting
None
Command Mode
Global Configuration
Command Usage
• The key number specifies a key value in the NTP authentication key list. Up
to 255 keys can be configured on the switch. Re-enter this command for each
server you want to configure.
• Note that NTP authentication key numbers and values must match on both the
server and client.
• NTP authentication is optional. When enabled with the ntp authenticate
command, you must also configure at least one key number using this
command.
•Use the no form of this command without an argument to clear all
authentication keys in the list.
Example
Related Commands
ntp authenticate (4-59)
show ntp
This command displays the current time and configuration settings for the NTP
client, and indicates whether or not the local time has been properly updated.
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command displays the current time, the poll interval used for sending
time synchronization requests, and the current NTP mode (i.e., unicast).
Console(config)#ntp authentication-key 45 md5 thisiskey45
Console(config)#