Filter
Top Products
Chapter 3: Replacing notebook components
97
To replace the palm rest:
1 Complete the steps in “Preparing the notebook” on page 55.
2 Remove the memory bay cover by following the steps in “Adding or replacing
memory modules” on page 57.
3 If the notebook has wireless networking built in, unplug the wireless antennas by
following the steps in “Replacing the IEEE 802.11 wireless card” on page 67.
4 Remove the hard drive(s) by following the steps in “Replacing the primary hard
drive” on page 64 and “Replacing the secondary hard drive” on page 73.
5 Remove the keyboard cover by following the steps in “Replacing the keyboard
cover” on page 78.
6 Remove the keyboard by following the steps in “Replacing the keyboard” on page
80.
7 Remove the LCD assembly by following the steps in “Replacing the LCD assembly”
on page 84.
8 Remove the screw holding the keyboard plate to the notebook, then lift and
remove the keyboard plate.
Screw