Filter
Top Products
84
Chapter 3: Replacing notebook components
Replacing the LCD assembly
Tools you need to complete this task:
v
Screws removed during this task:
To replace the LCD assembly:
1 Complete the steps in “Preparing the notebook” on page 55.
2 Open the memory bay by following the steps in “Adding or replacing memory
modules” on page 57.
3 Open the wireless bay by following the steps in “Replacing the IEEE 802.11 wireless
card” on page 67.
4 If the notebook has wireless networking built in, unplug the wireless antennas by
following the steps in “Replacing the IEEE 802.11 wireless card” on page 67.
5 Taking care to note the cables’ routing and positions as they are installed from
Acer, slide the antenna cables out of the wireless bay.
Flat-blade driver Scribe or non-marring - OR -
Phillips #0 screwdriver
4 black M2.5×6.5
(Hinge-top)
2 black M2.5×6.5
(Hinge-bottom)
2 black M2.5×5
(Keyboard cover)