Filter
Top Products
Chapter 3: Replacing notebook components
71
Replacing the CMOS battery
Important: Use only CMOS batteries designed for this notebook.
Tools you need to complete this task:
v
Screws removed during this task:
Locating components:
To replace the CMOS battery:
1 Complete the steps in “Preparing the notebook” on page 55.
2 Remove the optional IEEE 802.11 wireless card by following the instructions in
“Replacing the IEEE 802.11 wireless card” on page 67.
Flat-blade driver
Scribe or non-marring tool
- OR -
Phillips #0 screwdriver
2 chrome M2×3
(IEEE 802.11 wireless
card)
CMOS battery bay