Filter
Top Products
Chapter 3: Replacing notebook components
115
8 Remove the palm rest by following the instructions in “Replacing the palm rest” on
page 96.
9 Disconnect the cable from the Bluetooth card. Use a scribe or other non-marring
tool to gently push the plug out of the connector.
10 Remove the old Bluetooth card from the notebook.
11 Insert the new Bluetooth card.
12 Connect the Bluetooth cable to the Bluetooth card.
13 Replace the palm rest by following the steps in “Replacing the palm rest” on page
96.
14 Replace the LCD assembly by following the steps in “Replacing the LCD assembly”
on page 84.
15 Replace the keyboard by following the steps in “Replacing the keyboard” on page
80.
16 Replace the keyboard cover by following the steps in “Replacing the keyboard
cover” on page 78.
17 Replace the hard drive(s) by following the steps in “Replacing the primary hard
drive” on page 64 and “Replacing the secondary hard drive” on page 73.
18 If the notebook has wireless networking built in, reconnect the wireless antennas
by following the steps in “Replacing the IEEE 802.11 wireless card” on page 67.
Bluetooth card
connector