Filter
Top Products
Chapter 3: Replacing notebook components
127
18 Make sure a thermal pad is placed between the new cooling assembly and other
components as shown.
19 Insert the new cooling assembly into the notebook.
20 Tighten the captive screws that secure the cooling assembly to the system board.
Use the numbers stamped in the metal next to each screw and tighten the screws in
numerical order (start with 1, then 2, then 3).
Caution: When tightening the cooling assembly’s screws into the
numbered holes, tighten them in numerical order.
21 Replace the other cooling assembly screws removed in Step 14.
Thermal
grease
Thermal
grease
Thermal pad