Filter
Top Products
74
Chapter 3: Replacing notebook components
3 Use the thumb notch to lift the hard drive bay cover, then remove it. Be careful not
to break off the tabs located on the end of the cover opposite the thumb notch.
4 Using the plastic tab, lift straight up on the hard drive, then remove it.
5 If your new hard drive already includes the hard drive bracket, go to step Step 10.
-OR-
If you need to move the hard drive bracket from your old hard drive to your new
hard drive, go to step Step 6.
6 Remove the screws that secure the hard drive to the hard drive bracket.
Thumb notch
Screw
Screw
Screw
Screw