Filter
Top Products
Chapter 3: Replacing notebook components
87
Replacing the inverter
Tools you need to complete this task:
v
Screws removed during this task:
To replace the inverter:
1 Complete the steps in “Preparing the notebook” on page 55.
2 Remove the LCD panel by following the steps in “Replacing the LCD assembly” on
page 84.
3 Remove the rubber inserts from the front of the LCD panel assembly.
Flat-blade driver Scribe or non-marring tool- OR -
Phillips #0 screwdriver
2 black M2.5×6.5
(Hinge-bottom)
2 black M2.5×5
(Keyboard cover)
6 black M2.5×5 (LCD
front panel)
4 black M2.5×6.5
(Hinge-top)
Insert
Insert
Insert
Insert
InsertInsert