Filter
Top Products
Chapter 3 57
Removing the DIMM Upper Plate
1. See “Removing the Battery Pack” on page 53.
2. See “Removing the Middle Covers” on page 56.
3. See “Removing the Keyboard” on page 56.
4. Remove the two screws, and then detach the DIMM upper plate from the heat sink plate.
Removing the Internal Memory Module
1. See “Removing the Battery Pack” on page 53.
2. See “Removing the Middle Covers” on page 56.
3. See “Removing the Keyboard” on page 56.
4. See “Separating the Upper Case from the Lower Case” on page 60.
5. Push the latches on both sides of the socket to release the DIMM, and then remove the DIMM from the
main unit.
Removing the Modem Board
1. See “Removing the Battery Pack” on page 53.
2. See “Removing the Middle Covers” on page 56.
3. See “Removing the Keyboard” on page 56.
4. Remove the two screws, and then detach the modem board from the main board. Turn the modem board
over.
.