Filter
Top Products
62 TravelMate C110
Removing the Touch Pad Module
1. See “Removing the Battery Pack” on page 53.
2. See “Removing the Middle Covers” on page 56.
3. See “Removing the Keyboard” on page 56.
4. See “Removing the LCD Module” on page 58.
5. See “Separating the Upper Case from the Lower Case” on page 60.
6. First release the latches in the way as shown here. Snap off the touch pad module from the upper case
carefully.
7. Turn the touch pad board over, put it on the upper case, and then disconnect the touch pad cable from the
touch pad board. Remove the touch pad board from the upper case
.
Removing the Touch Pad FPC
1. See “Removing the Battery Pack” on page 53.
2. See “Removing the Middle Covers” on page 56.
3. See “Removing the Keyboard” on page 56.
4. See “Removing the LCD Module” on page 58.
5. See “Separating the Upper Case from the Lower Case” on page 60.
6. See “Removing the Speaker” on page 61.
7. Remove the touch pad FPC from the upper case as shown below.