Filter
Top Products
68 TravelMate C110
Removing the Main and Auxiliary Antenna
1. See “Removing the Battery Pack” on page 53.
2. See “Removing the Middle Covers” on page 56.
3. See “Removing the Keyboard” on page 56.
4. See “Removing the LCD Module” on page 58.
5. See “Removing the LCD Bezel” on page 66.
6. Remove the one silver screw and the other two silver screws as shown below. Detach the main antenna
at the top and auxiliary antenna at the bottom from the LCD module.
NOTE: When you reassemble the machine, please remember to put the two antennas back with the small
latches installed well and the two RF cables arranged well.
Removing the LCD
1. See “Removing the Battery Pack” on page 53.
2. See “Removing the Middle Covers” on page 56.
3. See “Removing the Keyboard” on page 56.
4. See “Removing the LCD Module” on page 58.
5. See “Removing the LCD Bezel” on page 66.
6. Remove the four screws and then detach the LCD together with the protection cover from the LCD panel
carefully.
NOTE: Please do not detach the protection cover from the LCD. The intention to do so will cause the damage
to the protection cover and the LCD.
Removing the Coaxial Cable
1. See “Removing the Battery Pack” on page 53.
2. See “Removing the Middle Covers” on page 56.
3. See “Removing the Keyboard” on page 56.
4. See “Removing the LCD Module” on page 58.
5. See “Removing the LCD Bezel” on page 66.
6. See “Removing the LCD” on page 68.