Filter
Top Products
38 TravelMate C110
Interrupt Sets the IRQ of the Com operation.
Help: Set the base I/O address for serial port A.
IRQ3
IRQ4
DMA Channel Sets a DMA channel for the printer to operate in ECP
mode. This parameter is enabled only if operation
mode is set to ECP.
Help: Set the DMA channel for the parallel port.
DMA1
DMA3
Parallel Port Enables or disable the parallel port.
The parallel port is a PnP device. Enabled/Disabled
setting won’t affect the Windows Device Manager
setting of the parallel port.
Sets operation mode of the parallel port.
Only set the parallel post operation mode in BIOS
setup. If set to be ECP mode, the Windows will
assume the parallel port as the ECP port.
If operation mode is set to Base I/O address, sets the
base I/O address, of the parallel port.
If operation mode is set to interrupt, sets the interrupt
request of the parallel port.
If operation mode is set to ECP DMA Channel, sets
the direct memory access (DMA) channel for the
printer to operate in ECP mode. This parameter is
enabled only if operation mode is set to ECP.
Help: Set the mode for the parallel port using
Disabled
Enabled
Auto
Mode Sets speration mode of the parallel port.
Only set the parallel post operation mode in BIOS
Setup. If set to be ECP mode, the Windows will
assume the parallel port as the ECP port.
Help: Set the mode for the parallel port using
Bi-directional
EPP
ECP
Base I/O address Sets the base I/O address of the parallel port.
Help: Set the base I/O address for the parallel port.
378, 278, or 3BC
Interrupt Sets the interrupt request of the parallel port.
Help: Set the interrupt request for the parallel port.
IRQ5 or IRQ7
Parameter Description Options