Filter
Top Products
Chapter 3 65
Removing the PCMCIA Socket
1. See “Removing the Battery Pack” on page 53.
2. See “Removing the Middle Covers” on page 56.
3. See “Removing the Keyboard” on page 56.
4. See “Removing the LCD Module” on page 58.
5. See “Separating the Upper Case from the Lower Case” on page 60.
6. See “Removing the Main Board” on page 64.
7. See “Removing the Thermal Plate” on page 64.
8. Remove the four screws, and then detach the PCMCIA socket from the main board.
.
Removing the Modem Cable
1. See “Removing the Battery Pack” on page 53.
2. See “Removing the Middle Covers” on page 56.
3. See “Removing the Keyboard” on page 56.
4. See “Removing the LCD Module” on page 58.
5. See “Removing the Modem Board” on page 57.
6. See “Separating the Upper Case from the Lower Case” on page 60.
7. See “Removing the Main Board” on page 64.
8. See “Removing the Thermal Plate” on page 64.
9. Detach the tape, and then disconnect the modem cable from the main board.
10. Remove the modem cable
.