Filter
Top Products
Chapter 2 33
Main System Settings
The Main System Settings screen allows you to set the system date and time.
The following table describes the parameters in this screen
.
Parameter Description
System Time Sets the system time
Format: HH:MM:SS ( Hour : Minute : Second )
Help: <Tab>,<Shft-Tab>, or <Enter> selects field.
System Date Sets the system date.
Format: MM/DD/YYYY (Month/Day/Year)
Help: <Tab>, <Shift>, or <Enter> selects field.
Boot Display Set the display output device on boot up.
Help: Set the display output device on boot up.
When set to Auto, the computer automatically determines the display
device. If an external display device (e.g., monitor) is connected, it
becomes the boot display. When set to Both, the computer outputs to both
the LCD and the external display if one is connected.
Option: Both or Auto
Screen Expansion Options: Enable or Disable.
Help: Options: Enable or Disable.
QuickBoot Mode Options: Enable or Disable
Help: Allow the system to skip certain tests while booting. This will
decrease the time needed to boot the system.
PhoenixBIOS Setup Utility
Information
Main
Advanced Security Power Boot Exit
Item Specific Help
System Time: [12:00:00]
System Date: [01/01/2002]
Boot Display [Auto]
Screen Expansion [Enabled
<Tab>,<Shift-Tab>,or
<Enter>selects field
QuickBoot Mode [Enabled]
Startup Screen [Enabled]
Boot on LAN [Disabled]
Hotkey Beep [Enabled]
Auto Dim [Enabled]
F12 Multi-Boot [Enabled]
F1
Help
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
Select Menu
Enter
Select
>
Sub Menu
F10
Save and Exit