Filter
Top Products
Chapter 3 67
Removing the LCD Hinges with the Center Hinge
1. See “Removing the Battery Pack” on page 53.
2. See “Removing the Middle Covers” on page 56.
3. See “Removing the Keyboard” on page 56.
4. See “Removing the LCD Module” on page 58.
5. See “Removing the LCD Bezel” on page 66.
6. Pull the cables out from the center hinge, remove the two screws, push the cables out through the center
hinge and then remove the LCD hinges together with the center hinge from the LCD panel.
Removing the Button Board & Inverter Board
1. See “Removing the Battery Pack” on page 53.
2. See “Removing the Middle Covers” on page 56.
3. See “Removing the Keyboard” on page 56.
4. See “Removing the LCD Module” on page 58.
5. See “Removing the LCD Bezel” on page 66.
6. Remove the two screws on the button board, and the other two screws on the inverter board
respectively.
7. Disconnect the LCD power cable from the inverter board and then detach the button board together with
inverter board from the LCD panel carefully.. Disconnect inverter cable from the inverter board.