Filter
Top Products
91
Setting and changing the password
To set or change a Supervisor/User password:
1 Enable the Supervisor Password or User Password parameter in the
System Security menu by pressing the Up or Down arrow key to
select Present. The corresponding password window appears:
Disk Drive
Control
The disk drive control features
enable or disable the read/write
functions of disk drives. These
features can also control the
diskette drive boot function to
prevent loading operating
systems or other programs from a
certain drive while the other
drives remain operational.
Floppy Drive Sets the control level of the
floppy drive
Normal
Write Protect All
Sectors
Write Protect Boot
Sectors
Disabled
Hard Disk
Drive
Sets the controller of the IDE drive Normal
Write Protect All
Sectors
Write Protect Boot
Sectors
Disabled
Processor
Serial Number
The Pentium III processor
incorporates an individual serial
number in each chip that can
identify individual CPUs. When
enabled, CPUs can be identified
by processor serial number.
Disable this parameter to
deactivate this feature.
Disabled
Enabled
Parameter Description Option
AA G600.book Page 91 Thursday, August 23, 2001 2:31 PM