Filter
Top Products
61
Installing expansion cards
There are two kinds of expansion slots available on your system board:
PCI (Peripheral Component Interconnect) and AGP (Accelerated
Graphics Port).
To install an expansion card:
1 Remove the housing panels. Refer to page 38 for more detailed
instructions.
2 Locate an empty expansion slot on the system board.
3 Remove the metal bracket opposite the selected empty expansion
slot by removing the screw that holds the bracket to the housing
then pulling out the bracket.
4 Remove the expansion card from its protective packaging.
5 Align the card in the empty bracket. Make sure that the card is
properly seated.
AA G600.book Page 61 Thursday, August 23, 2001 2:31 PM