Filter
Top Products
3 Upgrading your system
50
Note: Refer to “Mainboard layout” on page 40 for the location of
the SCSI connector.
4 Replace the housing panels.
System board connector cable
IRemoving the BPL5M hot-swap cage from the housing
1 Remove the housing panels. Refer to page 38 for more detailed
instructions.
2 Remove the two screws that secure the hot-swap cage to the
housing.
No. Item
1 Connects to the mainboard
2 Red strip
3 Connects to the hot-swap cage
AA G600.book Page 50 Thursday, August 23, 2001 2:31 PM