Filter
Top Products
4 BIOS Setup utility
84
System Sleep
Timer
This parameter sets the system to the
lowest power-saving mode after a
specified period of inactivity. Any
keyboard or mouse action or any activity
detected from the IRQ channels resumes
system operation.
Off
On
Sleep Mode Lets you specify the power-saving mode
that the system will enter after a specified
period of inactivity.
This parameter becomes configurable only
if the System Sleep Timer is on. Any
keyboard or mouse action, or any enabled
monitored activities occurring through the
IRQ channels resume system operation.
Standby
Suspend
Power Switch
< 4 sec.
When set to Power off, the system
automatically turns off when the power
switch is pressed for less than 4 seconds.
When set to Suspend, the system enters
the suspend mode when the power switch
is pressed for less than 4 seconds.
Power off
Suspend
System Wake-
up Event
The system wake-up event allows the
system to resume operation when the
modem ring indicator is enabled.
Modem ring
indicator
When Enabled, any fax/modem activity
wakes up the system from suspend mode.
Enabled
Disabled
PCI Power
Management
Enables or disabled the PCI power
managment function
Enabled
Disabled
RTC Alarm Allows you to set a certain time on a
certain day to wake-up your system from
suspend mode.
Disabled
Enabled
Resume Day If RTC alarm is enabled, the system will
resume operation on the day indicated
here.
User input
Resume Time If RTC alarm is enabled, the system will
resume operation at the time indicated
here.
User input
Parameter Description Option
AA G600.book Page 84 Thursday, August 23, 2001 2:31 PM