Filter
Top Products
3 Upgrading your system
38
3 Lift it up a little, then move it away from the housing.
Opening the side panel
A microswitch is located on the side panel. It helps indicate whether
the panel is removed or intact.
1 Turn off your system unit and unplug all cables.
2 Place the system unit on a flat, steady surface.
3 Open then remove the front panel door. Refer to page 37 for
more detailed instructions.
4 Remove the two front screws with a Phillips screwdriver. Keep
them in a safe place for later use.
AA G600.book Page 38 Thursday, August 23, 2001 2:31 PM