Filter
Top Products
4 BIOS Setup utility
104
Plug and Play
OS
When this parameter is set to Yes, BIOS
initializes only PnP boot devices such as
SCSI cards. When set to No, BIOS initializes
all PnP boot and non-boot devices such as
sound cards.
Note: Set this parameter to Yes only if
your operating system is Windows 95/98 or
Windows 2000.
Yes
No
Reset Resource
Assignments
Set this parameter to Yes to avoid IRQ
conflicts when installing non-PnP or PnP
ISA cards. This clears all resource
assignments and allows BIOS to reassign
resources to all installed PnP devices the
next time the system boots. After clearing
the resource data, the parameter resets to
No.
Yes
No
Parameter Description Option
AA G600.book Page 104 Thursday, August 23, 2001 2:31 PM