Filter
Top Products
Appendix B: System rack installation guide
134
h Slide the roller towards the lock.
i Adjust the inner sliding rail until you can see the screw holes.
j Attach the mounting bracket to the front end of the
mounting rail and align the screw holes. Secure it with two
M4 x L8 screws with nut and washer.
k Slide and adjust the inner sliding rail again to see the third
screw hole. Secure it with one M4 x L8 screw with nut and
washer. The position of the mounting bracket on this end is
fixed.
AA G600.book Page 134 Thursday, August 23, 2001 2:31 PM