Filter
Top Products
4 BIOS Setup utility
102
PnP/PCI Options
PnP/PCI Options allows you to specify the settings for your PCI
devices. Selecting this option displays the following screen:
Parameter Description Option
PCI IRQ
Setting
Select Auto to let BIOS automatically
configure the plug-and-play (PnP) devices
installed on your system; Otherwise, select
Manual.
Note: Refer to the documentation that
came with your PCI card for more
technical information.
Auto
Manual
PCI Slot 1
PCI Slot 2
PCI Slot 3
PCI Slot 4
PCI Slot 5
When you set the PCI IRQ Setting
parameter to Auto, these parameters
specify the auto-assigned interrupt for
each of the PCI devices. If you set the PCI
IRQ Setting parameter to Manual, you
need to specify the interrupt that you
want to assign for each PCI device installed
in your system.
User input
AA G600.book Page 102 Thursday, August 23, 2001 2:31 PM