Adaptec ANA-69000 Network Card User Manual


 
9-9
Duralink64 Standard Driver for NetWare
Configuring IP
a In the List of Frame Types box, select the frame type, and
then press Enter.
b In the IP Parameters box, select Enter IP Address, and then
press Enter.
Figure 9-12. IP Parameters Box
c In the IP Address box, type the address number, and then
press Enter.
Figure 9-13. IP Address Box
d In the IP Parameters box, select Enter Subnet Mask, and
then press Enter.
e In the Subnet Mask box, type the corresponding subnet
mask, and then press Enter.
Figure 9-14. Subnet Mask Box
f Press Esc.
g Repeat Steps a through f for each appropriate port or pair.
h Press Esc until you return to the List of Ports/Failover Pairs
box.
4 Repeat Steps 1 through 3 for any other ports you wish to
configure.
5 Press Esc until you return to the Main Menu.
6 Continue to Viewing the Configuration.
IP Parameters
Enter IP Address
Enter Subnet Mask
IP Address
1.1.1.2
Subnet Mask
ff.ff.ff.0