Filter
Top Products
12-7
Installing Duralink64 NetWare Client
Connecting Clients to the NetWare
Port Aggregation Server
For optimum performance of NetWare Duralink64 Port
Aggregation, all clients (any brand) should increase their IPX retry
count.
■ For DOS clients using VLM or Novell Client32
Type the following lines in
net.cfg
(indent the second line):
protocol ipx
ipx retry count = 255
■ For Windows 95 Clients using Novell Client32
From the Control Panel, locate NetWare Clients, and then enter
255
under the IPX retry count in the IPX 32-bit Protocol tab.
■ For Windows NT Clients using Novell Client32
Set the IPX retry count in the registry in NetWare Workstation
Parameters. Use the following steps:
a
From the DOS prompt, type
regedit
to enter the Registry
Editor.
b
Double-click hkey_local_machine.
c
Double-click System.
d
Double-click CurrentControlSet.
e
Double-click Services.
f
Double-click NetWare Workstation.
g
Double-click Parameters.
h
Double-click Retry Count to enter the Edit DWORD Value
menu.
i
Change base to decimal, and then change value data to 255.
j
Click OK.
k
Close the Registry Editor.
l
Restart the system.
❒