Filter
Top Products
8-11
Duralink64 Port Aggregation for Windows NT
Assigning the TCP/IP Address
Note: If you are an Windows NT 3.51 user, please refer to the
Windows NT 3.51 documentation for help configuring protocols.
Once you have configured Duralink64 Port Aggregation, Windows
NT prompts you to configure the protocol. IP addresses to groups
and stand-alone ports are assigned in the IP Address tab, such as
shown in the following figure. Ports assigned to a group use the
same IP address; therefore, it must be entered only once.
To assign a TCP/IP Address follow these steps.
Figure 8-9. IP Address Tab
1
In the IP Address tab, click the DuraLAN NIC port from the
Adapter list.
2
In the IP Address field, type the IP address.