Filter
Top Products
1-3
Getting Started
Fast Ethernet
Fast Ethernet is a networking standard defined by the Institute of
Electrical and Electronic Engineers (IEEE) in the IEEE 802.3u
Specification. Fast Ethernet runs at 100 Mbps, or at 200 Mbps in Full
Duplex mode.
Fast Ethernet uses the same Carrier Sense Multiple Access with
Collision Detection (CSMA/CD) architecture used on 10BASE-T
and 10BASE-2 10 Mbps network specifications, which allows for
easy integration with existing networks.
Adaptec DuraLAN NICs
Note: 64-bit NICs will also work in 32-bit PCI slots.
Adaptec provides the following PCI 10/100 DuraLAN Fast Ethernet
NIC models:
■ ANA-69011/
TX
Single32™—a single-port 32-bit NIC supporting
autosensing between 10 and 100-Mbps line speeds.
Figure 1-1. ANA-69011
/
TX
Single32™
DuraLAN NIC
Single RJ-45
Por
t
32-bit PCI 2.1 Bus