Filter
Top Products
10-13
Duralink64 Failover for NetWare
Copying and Saving the Configuration
After verifying all port and group configurations, you can install the
program and configuration-related files to the server.
1
From the Main Menu, select Install Software, and then press
Enter.
2
When the Copy New Files box appears, select Yes, and then
press Enter.
Figure 10-23. Copy New Files Box
3
From the Main Menu, press Esc to exit the program.
4
In the Save Configuration box, select Save and Quit. The
configuration data is saved in
sys:\etc\configsf.ncf
.
– If you do not want to not save the changes, select Quit
Without Saving, and then press Enter.
– To return to the Main Menu, select Return to Previous Menu,
and then press Enter.
5
At the system console prompt, type
Down
and then press
Enter.
6
Typ e
Restart Server
, and then press Enter. The server restarts
and opens the Failover Status screen, which must appear
before logging on clients or using the server console.
7
Continue to Viewing the System Status.
Copy New Files?
No
Yes