Filter
Top Products
5-14
DuraLAN Fast Ethernet NICs User’s Guide
Windows NT 3.51
To remove the previously installed Duralink64 driver from the
Windows NT 3.51 platform, follow these steps:
1
In the Main window, double-click Control Panel.
2
In the Control Panel, double-click Network to enter the Network
Settings window.
3
In the Installed Adapters Cards box, click the DuraLAN NIC, and
then click Remove.
4
Repeat step 3 until all DuraLAN NICs have been removed.
5
Click OK when you are done.
6
Restart the system.
Windows 98 and 95 OSR1/OSR2
To remove the previously installed DuraLAN driver from the
Windows 98 and Windows 95 OSR1/OSR2 platform, follow these
steps:
1
From the Start menu, point to Settings, and then click Control
Panel.
2
In the Control Panel, double-click System.
3
Select the Device Manager tab, then click Network Adapters.
4
Select Adaptec DuraLAN NIC to remove, then click Remove.
5
Repeat steps 3 and 4 for each existing DuraLAN NIC.
6
Restart the system.
❒