Filter
Top Products
11-16
DuraLAN Fast Ethernet NICs User’s Guide
Copying and Saving the Configuration
Once you have established and verified all port and group
configurations in lbsetsf, you are ready to install program and
configuration related files to the server.
1
From the Main Menu, select Install Software, and then press
Enter.
2
In the Copy New Files box, select Yes, and then press Enter.
Figure 11-29. Copy New Files Box
3
From the Main Menu, press Esc to exit the program.
4
In the Save box, select Save and Quit to save the configuration
in
sys:\etc\configsf.ncf
and quit the program.
– If you do not want to save the changes, select Quit without
Saving, and then press Enter.
– If you wish to return to the Main Menu, select Return to
Previous Menu, and then press Enter.
5
Restart the server.
– In NetWare 4.x:
a
At the system console prompt, type Down, and then
press Enter.
b
Typ e Restart Server.
– In NetWare 5.0:
a
At the system console prompt, type restart server, and
then press Enter.
6
Continue to Viewing System Status on page 11-17.
Copy New Files?
No
Yes