Filter
Top Products
Command Reference
601356 Rev A Command Reference 2-143
Commands
The capacity of a library media class is a soft limit. If the
capacity of a library media class is exceeded, the entire
vsreclassify request is processed unless the capacity of the
associated MediaClass group is reached. When the capacity of
the library media class is reached, applicable High Mark
processing is initiated.
An attempt to reclassify media into its current MediaClass
group fails.
If reclassifying media places it in a MediaClass group that does
not have the media’s present location as a preferred location, the
media is NOT moved just to place it into a preferred area. Later,
if the media is mounted then dismounted, or ejected then
entered, an attempt is made to place the media in a preferred
location as defined by the target library media class.
If media to be reclassified is in a library, the target MediaClass
group must be associated with that library.
Media that does not reside in a library can be reclassified.
The vsreclassify command triggers unsolicited status
messages from VolServ.
See Also
• vsmount
• vsmedclassqry