Filter
Top Products
Command Reference
2-38 Command Reference 601356 Rev A
Step 1. Errors with verbose option not specified. Requests
VolServ to remove MED012, MED013, MED014,
and MED051 from the Eject list and to return status
on media only if processing for that media failed.
Step 2. Output returned:
Notes
The vscleareject request fails for media if the media is
already selected for eject by the operator.
Failure of the vscleareject request for one or more media in
a list does not fail the request for all media in the list.
An operator also removes media from the Eject list by
performing an Eject Fail from the appropriate library’s console
display. The Eject Fail functionality is not available from the
command line.
The Clear Eject command triggers unsolicited status messages
from VolServ.
A pending Clear Eject request is cancelled with the VolServ
cancel command. The VolServ cancel command is run from the
command line by sending a SIGQUIT signal (control-\). The
request also is aborted by sending the SIGINT signal
(control-c).
See Also
• vscheckout,
vscleareject MED012 MED013 MED014
MED051
Clear Eject 2 of 4 media was successful
Error VOL024: error in the list
Media [MED013] media not marked for ejection
Media [MED051] item not found